First universal tester for in-vehicle communication. Spirent Automotive ComTT is the first universal platform for compliance, performance and CAN testing in a single solution.
It combines several physical layer technologies on the hardware side with industry-proven software tools for comprehensive simulation and emulation of in-vehicle network communication.
The testing challenges of today’s automotive engineering are not limited to specific technologies within modern vehicles, all types of communication paths are used, such as Automotive Ethernet, CAN/CAN-FD or LIN, just to name a few.
It is not only the case that interfaces and communication protocols are combined, there is also the translation from one protocol to another (gateway function) that occurs in many electronic control units (ECUs).
Test ports – 4x 10/100/1000 Mbit/s SFP based Ethernet ports – 16x CAN-FD – 1x Single-Wire CAN – 1x Fault-Tolerance CAN – 2x LIN – Management & power – 5 USB ports – 1 Ethernet port – 1 Display port – Powerinput 6-36 VDC 12 VDC nominal – Storage 250GB SSD
Verify static and dynamic time, phase and frequency synchronisation performance on your packet network. Calnex Sentinel is the dedicated synchronization tester, now with 5G Over-the-Air measurements.
So many indoor wireless networks to design, so little time. But with iBwave Design, the industry standard for indoor wireless network design, the lifecycle of your network design is simplified so you can design and deliver wireless networks smarter and faster than ever before.
Spirent CloudSure is an extensible and open test platform for benchmarking and validating NFV ecosystems, enabling Service Providers to ensure their infrastructure virtualization. CloudSure helps ensure the success of NFV-based environments such as 5G.
As the world prepares for 5G, the levels of synchronisation accuracy and data transfer rates required are increasing exponentially. In response, ITU-T is enhancing the G.827x series of standards to meet the precision requirements of the next generation – to ensure that Ethernet systems are robust against various transmission delays and
other effects that can significantly disrupt the precise transfer of time.
AMPERCOM S.r.l. – Società a responsabilità limitata con socio unico
© 2024 SEBA! Design - All rights reserved
AMPERCOM S.r.l. Viale Lunigiana, 46, 20125 Milano - R.E.A. MI 1636071 - Reg. Imp. MI 2001-7995 - Cap. Soc. € 50.000 i.v. - P. I./C.F. 13290110157 - C.D. RR66BDG